Laser Engraving Machine Compact Mini Laser Engraver Wood Laser Cutter for DIY Home Use

【Compressed Laser】TT-5.5S is a powerful laser engraving machine with advanced LD+FAC technology for a compressed laser beam to achieve fast engraving speed & high precision.

【2-in-1 Machine】It is one desktop home laser engraver & laser cutter all in one machine.

【Mini & Pro Kit】It’s compact size and much higher performance to meet demands for professional projects.

【Wide Compatibility】Laser engraving & cutting machine for stainless steel, wood leather, alumina, steel, etc.

3D Laser Printer Desktop Laser Engraving Machine-TwoTrees TT-5.5S

3D laser printer is a laser engraving machine that uses a laser instead of ink to achieve 3D object creation. The more general and popular phrase to the general public is laser engravers and cutters. With powerful and compressed laser spots, 3D laser printers are enabled to cut through or leave trails on multiple materials for amazing design results.

TT-5.5S is a powerful desktop 3D laser printer laser engraving machine using LD+FAC+C-lens technology with 0.08mm compressed laser spot for stronger engraving and cutting capabilities. Its 300*300mm cutting space allows users to process various materials of different sizes and realize their full potential of creation.

Feature Lists of 3D Laser Pritner

Compressed-Laser-Spot

Compressed Laser Spot

Latest LD + FAC compressed Spot technology to obtain more powerful 0.08mm laser spot with more concentrated and higher precision to reduces the engraving time.

3D-Laser-Printer-Lifting-table

Z-axis Lifting Table

With a fixed-focus, the Z-axis lifting table enables lower or raise the height of the laser head (0-40mm) to achieve the best engraving/cutting effect for different materials and heights.

Anti-slip-foot-pad

Anti-slip Bracket

Anti-slip foot pad design, easy to install and makes the machine more stable.

Large-Engraving-Size

300*300mm Engraving Range

300*300mm large carving area, provide enough space for most DIY projects. Without limit of carving height, so you can carve and cut multiple materials as you like.

X-axis-belt-tensioner

X-axis belt tensioner

The belt tensioner makes it easier and more convenient to adjust tightness of X-axis to avoid the engraving staggered layer caused by the loose belt and achieve higher accutacy.

Auxiliary-red-light-positioning

Auxiliary Positioning Red Light

The red auxilliary light helps users set the right positioning easily without extra settings.

Fixed-Laser-Spot

Fixed Focus Laser

No need to adjust the focal length before engraving. And the new laser offers both the possibility of precision engraving and high-energy cutting functions.

Suitable materials

Suitable forvarious materials such as leather, wood, MDF, acrylic, cardboard, bamboo, anodized aluminum, stainless steel, plastic, ceramics, paper, rubber, sponge paper, etc.

Multiple-Operation-System-Support

Wide compatibility

Compatible with LaserGRBL, LightBurn or BenBox for Windows, Mac, Linux system. Supports image file formats like NC, DXF, BMP, JPG, PNG, etc.

TwoTrees' LD+FAC Engraver VS Other Engravers

Cutting Result Comparison

More Powerful & Efficient

To get a better idea of the difference, we have tested to cut a 4mm wood with single LD of both LD+C-lens and LD+FAC+C-lens technology. Here is a cutting performance comparison image of the different technology. You might also check the left testing comparing images to cut 4mm wood with single LD.

Compared with LD+C-lens technology, the LD+FAC6-+C-lens cuts a deeper depth with clearer & thinner lines and leaves fewer burning trails.

FAC Compressed Laser Beam

More Efficient in Light Transmission

These two technologies also perform quite differently in terms of light preservation and transmission. To prove the difference, we run a test for both technologies. We tested the original LD power and the working power of the most focused laser spot. For LD+C-lens, only 76% of the 5.11W light from LD is efficiently converted into the focused laser spot with a working power of 3.89W.

However, 97.3% of the 5.23W laser light is converted into the 5.09W laser spot through LD+FAC+C-lens technology. It’s obvious that LD+FAC+C-lens has a higher working power and is more efficient in light transmission.

Laser-Engraving-Performance-Comparison

Better Cutting & Engraving Trails

Because of the 0.08mm compressed laser spot which is much smaller than that from LD+C-lens technology, it provides clearer & thinner cutting lines & trails as the left image shows. What’s more, since the light from LD+FAC+C-lens is collimated, the device has the same laser spot size at both fast-axis and slow-axis directions.

The collimated light beam not only preserves more light sources for higher power but also presents well-balanced cutting & engraving lines from horizontal & vertical directions. This might be safely ignored when cutting circles but have a great impact beyond your imagination while cutting a rectangular design. If you have no idea, the left image would remove your confusion.

Engraving & Cutting Materials for 3D Laser Printers TT-5.5S

Engraving & Cuttign Material for 3D Laser Printer
Engraving Works Display

Materials Test

Device & MaterialTT-5.5SRemark

Rotate the laser head column to adjust the height to focus the spot

Distance from laser head to engraving surface:(24MM)

SpecificationTesting Type

Rated Power: 5.5W

Tested Power: 4.98W

 
Plywood (1MM)Engraving2000mm/min 30%In actual operation, the hardness of the wood board being operated is different, and the cutting speed of different types of machines is set differently.
Cutting400~500mm/min 100%
Plywood (2MM)Engraving2000mm/min 30%
Cutting300~400mm/min 100%
Plywood (3MM)Engraving2000mm/min 30%
Cutting200~300mm/min 100%
Plywood (4MM)Engraving2000mm/min 30%
Cutting100~150mm/min 100%
Plywood (5MM)Engraving2000mm/min 30%
Cutting100mm/min 100% *2
Plywood (8MM)Engraving2000mm/min 30%
CuttingX
Acrylic Sheet (1MM)Engraving6000mm/min 20%The acrylic board used in the test is pure black.
Cutting100~200mm/min 100%
Acrylic Sheet (2MM)Engraving6000mm/min 20%
Cutting100~150mm/min 100%
Acrylic Sheet (3MM)Engraving6000mm/min 20%
Cutting150mm/min 100% *2/
Pine Board 7.0mmEngraving2000mm/min 40%/
Cutting100mm/min 100% *2
Pine Board 9.0mmEngraving2000mm/min 40%
CuttingX
Color A4 paper
0.1mm
Laser engraving6000mm/min 45%/
laser cutting4000mm/min 100%
Color A4 paper
0.3mm
Laser engraving4000mm/min 80%
laser cutting1500-2000mm/min 100%
250g/sq.m Kraft PaperEngraving4000mm/min 80%/
Cutting1500-2000mm/min 100%

3mm Cardboard

      (Carton)

Engraving6000mm/min 80%/
Cutting300-400mm/min 100%
Leather 0.7MMEngraving6000mm/min 80%/
Cutting700mm/min 100%
Non-woven Fabric (0.5mm, darker color)Engraving6000mm/min 60%Cause the material to burn through.
Cutting2000-3000mm/min 100%
Dust-free Cloth (white)EngravingXwill cause the material to melt.
Cutting50-100mm/min 100%
GauzeEngravingXwill make the material black.
Cutting300mm/min 100%
Plastic Board (In darker color)Engraving6000mm/min 70%Cause the material to melt and form a buildup.
CuttingX
Acrylic 5mmEngraving6000mm/min 20%/
CuttingX
Tinned WireEngravingX/
CuttingX
CobblestoneEngraving3000mm/min 100%/
CuttingX
CeramicsEngravingX/
CuttingX
Powder coated metal
Spray paint (metal)
Engraving5000mm/min 50%/
CuttingX
Electroplated MetalEngraving300mm/min 100%/
CuttingX
Anodized AluminumEngraving4000mm/min 60%/
CuttingX
Stainless SteelEngraving1500mm/min 100%/
CuttingX
Density board
3mm
Engraving5000mm/min 40%/
CuttingX
Laminated cardboard
5mm
Engraving4000mm/min 80%/
CuttingX

Specifications

Model numberTT-5.5s
TypeLaser Engraving
MaterialAluminum + Plastic
Control boardMKS LKS
Laser wavelength450nm
Laser power5500mW (LD+FAC)
Engraving Size300*300mm
Laser inputAC100-240V
Power supply12V 4A DC
PlugUSA / EU / UK / AU Plug (optional)
Accuracy0.08mm
Engraving speed8000mm/min
Carving methodComputer Online Operation
InterfaceUSB
File format.nc / .dxf / .bmp / .jpg / .png etc.
Engraving modeimage / text / scanning / outlining / pixel engraving, etc.
Support softwareLaser GRBL/LIGHTBURN
Support SystemWindows/Mac
Continuous working time≤6Hrs
Machine SizeL570*W485*H170MM

1) User Manual

English Manual  |  German Manual  |  Russian Manual

2) TF Card Files

Download

3) Drive

CH340SER

4)Software

 

LASERGRBL | LIGHTBURN

5) Testing Files

Download

 

 

 

 

 

 

 

Related Products

Need Help?

I’m Here To Assist You

Something isn’t Clear?
Feel free to contact me, and I will be more than happy to answer all of your questions.