- Gantry Fram x 1
- Base Fram x 1
- Extruder x 1
- Filament Holder x 1
- Filament x 1
- AC Power Cable x 1
- M5x50 Screw x 4
- Tool Bag x 1
- Connect Cable x 3
BLU-5 is a 3D PLA Printer with the largest printing space for desktop 3D printers from Two Trees collection. The recommended best temperature settings for PLA filaments are 210 °C for printing temperature and 20°C to 60 °C for hotbed temperature (Check our previous post to find out the best 3D printing temperature for different filaments?). In this concern, BLU-5 provides temperature configurations up to 260 °C for printing temperature and 100°C for hotbed temperature. The wide range of temperature availability makes BLU-5 not only a great choice for PLA filaments but also for most major filaments in the market including ABS, PETG, wood, etc. Following is a review video from Just Vlad and you might find how does the printer perform with the filament.
BLU-5 developed parts into very few modules that could be completely set up with 6 screws within 30 minutes.
BLU-5 is with integrated built-in 3DTouch kit which would test the distance between printing head and hotbed and compensate Z-axis deviation value.
BLU-5 is with the largest printing space which allows users to print larger objects or more models with single printing.
BLU-5 3D uses double Z-axis with synchronous belt, silent driver with less viberation for quiet, smooth and precise printing.
Its wheel tensioners for X-axis and Y-axis enable get proper tension easily to avoid vibration and print shift for better printing results.
The patented adaptive pulley would automatically adjust and fit the aluminum profile to reduce vibration to maxim level.
It would send warning once filaments break or run out. If printing interrupted by power filure, it would resume printing once power recoved.
4.3-inch touch control panel with quick and smooth responses to finger touch and provides multiple language options, easy and convenient to use.
High quality 4401S dual wheel extruder with more strength to guarantee faster and smoother filaments feeding and retraction.
Patented removable control box cover design, easy to replace the stepper drive.
Use two CAT 7 Ethernet cables RJ45 to transmit data. Say goodbye to tedious wiring steps and messy cables. Reduce the safety hazards caused by exposed wiring harnesses.
It is easy and convenient to give the hot bed platform stability to print without wobbling and make the model more smooth in surface.
BLU-5 Best PLA Printer to Buy BLU-5 is a 3D PLA Printer with the largest printing space for desktop 3D printers from Two Trees collection....
TT-5.5S is one portable desktop laser engraver designed for DIY enthusiasts and beginners. It’s super easy to use but provides results comparable to pro machines....
Be 1st to Get notified on new products